How do you unclog a toilet without a plunger?
Yes, there’s an actual legit answer to that question. Apparently, you can indeed unclog a toilet even if a plunger is MIA, and it’s about to become our new favorite bathroom hack.
Take a deep breath (okay, maybe not if the smell is funky), and calm down — then set your sights on a few things you’ll need to handle the backup and get out of there.
The technique requires a toilet that isn’t overflowing since you’ll need to add liquid to the bowl, as Instructables notes. (If your toilet is overflowing or looks like it might, Creative Homemaking suggests getting a little more creative/disgusting by removing the water manually first.) Let the bathroom games begin!
STEP 1: Squirt generous amounts of dish soap or shampoo into the clogged toilet. You can also cut a bar of soap into pieces and use that instead, according to HowStuffWorks.
STEP 2: Add a gallon of very hot (but not boiling) water to the bowl.
STEP 3: Wait a few minutes and watch — the water should break up the toilet paper, and the soap should help it slide down the pipe. You may need to repeat steps 1 & 2, or unravel a wire hanger and use that to gently push the debris down the pipe.
And if that doesn’t work, just use this Korean suction device... because why not make a gross situation even more revolting?
Are You Know?Moon created when 'about 20 moonlets collided'
A Stellar Explosion Could Be Visible In the Night Sky In 2022
SpaceX delays rocket launch because of bad weather
How to Unclog a Blocked Toilet Without a Plunger
What would you do if your toilet got clogged on a Saturday evening when the shops are closed and you are about to host a curry and beer party?
This instructable will show you a simple method for unclogging a toilet using hot water and shampoo. While there are other methods of clearing a toilet drain, this is a great option for unclogging a toilet because you don’t have to touch the water.
You will need:
- 1 clogged toilet (works best when someone has been overzealous with the toilet paper)
- A generous amount of surfactant (i.e., Dawn Dishwashing liquid, shampoo, liquid soap, or any other cleaner that gets sudsy)
- Hot (but not boiling) water
- A bucket or a basin to transport water to toilet
This will only work with a toilet that is not overflowing and has some room to hold extra water.
(For squeamish people: The picture of the blocked toilet was not created with actual bodily excretions.)
Step 1: Add Shampoo and Hot Water.
Get your bottle of shampoo/ soap and squirt a generous amount into the bowl.
Follow that with a bucket of very hot water from the hot tap (not boiling).
Fill the toilet full but not overflowing.
The reason you should not use boiling is because it has been said that boiling water can cause the toilet bowl to crack (I have not personally tested this assertion though as I do not have the money to buy a new toilet).
Then go have a cup of tea and let the blockage 'marinate'.
Step 2: Return and See Your Handy Work.
Hopefully after a few minutes the water level will have lowered. (Hot water helps break up toilet paper quicker and the soap lubricates the passage of solid material).
If nothing has happened wait 10 minutes more. If still nothing has happened you will probably need to use a different method (or bail some of the water out and add more hot water/ soap).
If the water level is lower than before add more soap and more hot water (hot water does not need to be as hot as the first time as this time there is less water in the toilet to heat up).
Again wait for water to drain (this should be quicker).
Repeat the process until water flows freely.
Step 3: Done
Remind your party goers to treat your toilet with respect and only put bodily excretions and small amounts of toilet paper in.
How to Unclog a Toilet Like a Plumber
It’s every man’s worst fear. You’re at someone’s house, you finish doing your business and flush the toilet, but instead of going down, the water comes up along with whatever you just deposited in the bowl. Would you be paralyzed with panic in that moment? Or do you know what to do?
For some reason, the lot has fallen to men to deal with clogged toilets. I guess in a time when we’re no longer needed to ride out in defense of the tribe, our toughness is marshaled to do battle in the bathroom. Many men, however, charge in brandishing their plunger but lacking a game plan on how to attack the clog. To help us learn how to effectively unclog a toilet, I called up Rod from Roto-Rooter and got the scoop. Here’s his advice.
Stop the toilet bowl from filling up. If it looks like the water might overflow out of the toilet, Rod suggests taking the lid off the tank as quickly as possible and closing the toilet flapper. The flapper releases water from the tank and into the bowl. It looks like, well, a flapper. If you’re worried that your flush has a good chance of turning into a flood, take off the top before you pull the trigger. Then you can keep one hand close to the flapper while the other hands pushes the flusher. The minute it appears the water is rising, you’re ready to stop the deluge.
Get the right plunger. Once disaster has been averted, it’s time to unsheathe your plunger. To effectively use a plunger, you need a good seal between it and the toilet bowl. Funnel-cup plungers are the best plungers for this. They’re the ones with a flange, or added piece, extending off the bottom of the rubber cup.
Warm up your plunger. Stiff, hard plungers don’t work as well as soft and pliant ones. Run your plunger under some hot water before you use it. This will soften up the rubber, which will help you get a better seal on the toilet bowl.
Plunge correctly. Stick the plunger in the bowl and use it to form a solid seal over the exit hole. Rod said that most people only focus on the downward push when plunging. But the pullback is just as important. Give a few good up and down strokes with the plunger and flush the toilet. If the water clears from the toilet, then you’ve successfully unclogged it. If the toilet starts overflowing again, just close the flapper to stop water from entering the bowl. Repeat the plunge and flush sequence until your clog is gone.
Secret Plumber Trick: Add hot water and dishwasher detergent. Add a few cups of hot water to the toilet bowl before you start plunging. After you pour the hot water in, let it sit for a few minutes. To put it mildly, the heat helps break the, um, stuff up. This will make unclogging the toilet with the plunger much, much easier. The heat from the hot water can sometimes break up the clog without plunging, so this could be a good tactic to use if you a clog a toilet at a friends house and you don’t want to face the embarrassment of asking for a plunger.
Also, try adding some dishwasher detergent to the mix. The soap can help break the clog up, as well.
(Hat tip Ryan and Jim in the comments.)
For harder clogs, use an auger. If the plunger doesn’t work, Rod says it’s time to bust out the auger. An auger is a cable-like device that you snake through the toilet hole to help loosen up a clog. You can find augers at most hardware stores.
To use an auger, you simply snake the cable down the hole. Start turning the crank on the end you’re holding until it stops. This means you’ve reached your clog. The auger will either break up the clog or hook on to it. If it feels like you’ve hooked the clog, pull it out. Discard any waste on the end of the auger. Give the toilet a few good plunges to clear up any left over blockage. Flush. Shazam! Cleared toilet.
When to call the plumber. There are times when your own efforts just aren’t enough. How do you know when it’s time to call in the professionals to battle your clog? Rod says that if you see water backing up in the sinks or showers whenever you flush, it’s time to bring in a plumber. Water backing up in odd locations when you flush means you have a clogged main line. A plunger and auger won’t get the job done.
Avoiding clogged toilets. Rod’s parting advice was to avoid clogs in the first place. First, teach children that the toilet is not a Jacuzzi or water ride for their GI Joes. Rod says that the majority of his work with clogged toilets involves toys and other items that kids have flushed down the toilet.
Rod also says it’s important to ensure the jets around the toilet bowl’s edge are nice and clean. Stopped up jets will prevent the toilet from flushing at full power which in turn prevents you from clearing out the toilet and its contents. Weekly toilet cleaning with a brush will prevent build-up. If you haven’t cleaned the toilet in a while, you’ll probably have mega buildup. Rod suggests using an Allen wrench or screwdriver to clear out the junk.
Finally, take it easy on the paper. You don’t need an entire roll to wipe your bum.